|This page has links to websites or programs not trusted by Scratch or hosted by Wikipedia. Remember to stay safe while using the Internet, as we can't guarantee the safety of other websites.|
Cloud data is a feature that allows users to store variables "in the cloud," or on the server. Cloud variables have the character "☁" (a cloud icon in the font Scratch uses) in front of them, to distinguish from regular variables: It may use a different font if one's computer does not support it. Cloud data logs can be removed by the person who created the project. For example, if there is a test and someone does not want their score shown, but it goes onto the log, the creator can remove the log.
They update automatically, as opposed to requiring refreshing before updating. While the update is not instant, it is usually relatively quick.
|“||If both Scratchers have a reasonably fast Internet connection (DSL/Cable), and there are no restrictive firewalls on the computers/network, updates should be transmitted in milliseconds. However, a lot of computers have firewall software running in them, and if the firewall software blocks outgoing connections to TCP port 531 and TCP port 843, the time-lag becomes one-second.||”|
– FAQ Page
Cloud data may not be used by New Scratchers. The Scratch Team does not want people new to Scratch misusing cloud variables, as it could put a large load on the system that it cannot handle (see section "Issues with Cloud").
Cloud variables use the regular blocks associated with variables. The only difference is that the value is truly global, and is reflected across all copies of the project being viewed on the Scratch Website.
Cloud data is referred to as "persistent" in the code and some early development versions.
Since Cloud Data is stored on the server, cloud variables cannot be used in the Offline Editor.
Cloud variables are maintained through a secure Websockets connection.
To avoid overloading the cloud data infrastructure, cloud data updates are limited to a certain number per second when a project is being run. One should always avoid attempting to update a cloud variable in a fast loop that does not wait between updates. Generally, one should carefully consider how often a cloud variable is updated and try to limit any updates to only times when it is needed, such as when the value actually changes, and to limit how often the variable is updated.
If variable is being updated too often, the cloud data server will drop the connection temporarily and updates will not be sent to the cloud data servers until the connection is automatically re-opened after a variable waiting period.
Cloud data has a limit of up to ten (10) cloud variables per project. Cloud variables can contain only numbers (unlike regular variables, they cannot contain letters). A character limit of 128 digits per variable has also been implemented. Hexadecimal numbers are no longer supported.
Cloud List Engines
Cloud list engines are projects or scripts that store lists in cloud variables. To do this, they encode lists as a number, and set a cloud variable to said number. Later, the same code can turn the cloud variable back into a list. This was developed based on the idea that anything in the world can be represented with numbers. For example, all letters in the alphabet could be stored as number by assigning each letter a number from 1 to 26. A couple of examples of cloud list engines are here and here. You can use base 11 for only numbers and convert it to base 10. than to decode it, first you have to convert to base 11.
- High score
if <(local score) > (☁ high score)> then set [☁ high score v] to (local score) else say [You didn't beat the high score!]
ask [Vote for Pepsi or Coke! Which is your favorite?] and wait if <(answer) = [Pepsi]> then change [☁ pepsi votes v] by (1) else if <(answer) = [Coke]> then change [☁ coke votes v] by (1) else say [Sorry! That answer wasn't recognized.] end
- Encoding for receiving on the other end for projects with Human Communication
if < [whitelist v] contains (answer) ?> then encode (answer)::custom set [Player_1_chat v] to (result) else say[That word is not in the Whitelist so cannot be sent!] end
- Example function to encode base-10 text
define Encrypt (Input) set [charList v] to [ abcdefghijklmnopqrstuvwxyz234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ1.-!@#$%^&*()_+|\\:";'<>?/,` =] set [inputL# v] to  set [Encoded v] to  delete (all v) of [Return v] delete (all v) of [eFull v] repeat (length of (Input)) if <not <(letter (inputL#) of (Input)) = [ ]>> then Case Check (letter (inputL#) of (Input)) :: custom if <(letterCase) = [lowercase]> then set [lList# v] to  repeat until <<(letter (inputL#) of (Input)) = (letter (lList#) of (charList))> or <(lList#) > >> change [lList# v] by (1) end if <not <(lList#) > >> then add  to [eFull v] add (letter (1) of (lList#)) to [eFull v] add (letter (2) of (lList#)) to [eFull v] end change [inputL# v] by (1) else if <(letterCase) = [uppercase]> then set [lList# v] to  repeat until <<(letter (inputL#) of (Input)) = (letter (lList#) of (charList))> or <(lList#) > >> change [lList# v] by (1) end if <not <(lList#) > >> then add  to [eFull v] add (letter (1) of (lList#)) to [eFull v] add (letter (2) of (lList#)) to [eFull v] end change [inputL# v] by (1) else if <(letterCase) = [other]> then set [lList# v] to  repeat until <<(letter (inputL#) of (Input)) = (letter (lList#) of (charList))> or <(lList#) > (length of (charList))>> change [lList# v] by (1) end if <not <(lList#) > (length of (charList))>> then add  to [eFull v] add (letter (1) of (lList#)) to [eFull v] add (letter (2) of (lList#)) to [eFull v] end change [inputL# v] by (1) end end end else add  to [eFull v] add  to [eFull v] add  to [eFull v] change [inputL# v] by (1) end end set [Encoded v] to (eFull :: list) add (Encoded) to [Return v]
Cloud Data History
When the Scratch Team released the beta version of cloud data, they set up public logs for projects with cloud data in them showing the time cloud data was modified, who modified the data, the current value of the data, and the type of action of the data modification (such as del_var, rename_var, and set_var). To get onto the log simply click on the cloud data button at the bottom of a project page. This will then show you the users who changed the cloud data and at what time. If the user changes cloud data blocks not in their own project the cloud data will not be saved.
Cloud data is similar to Mesh. Both features allow sharing of variables across multiple simultaneous uses of the same project. By using variables, cloud data can also simulate broadcasts across projects, as shown in the scripts below:
when gf clicked set [old broadcast v] to (☁ broadcast) forever if <not <(old broadcast) = (☁ broadcast)>> then broadcast [cross-project message v] set [old broadcast v] to (☁ broadcast) when I receive [cross-project message v] . . .
when key [space v] pressed::hat events //This script will "broadcast" set [☁ broadcast v] to An optimized version would replace
broadcast [cross-project message v]for
broadcast (☁ broadcast)with a When I Receive block for each possible broadcast.
Due to cloud data limitations, a project using this method of broadcasting can only use broadcasts with numbers for messages.
|This article or section documents a feature not included in the current version of Scratch (2.0). It is only useful from a historical perspective.|
set [☁ Variable v] to [0xe]Since each digit of a hexadecimal number stores more information than its decimal equivalent, it may help store more data before reaching the character limit (useful if a project requires lots of storage in Cloud Variables). To encode a base-10 number into a base-16 number one could run the following script (assuming that a whole number [integer] is being converted):
define convert to base-16 (number) set [digits v] to [0123456789abcdef] set [output v] to  set [temp v] to (number) repeat until <(temp) = (0)> set [output v] to (join (output)(letter (((output) mod (16)) + (1)) of (digits))) //Remainder on division by 16 set [temp v] to (([floor v] of (temp)) / (16)) end //Use (output) //to get the result from this.
To convert back, simply run any of the following blocks and they will all return the base-10 value of the block:
((☁ HexVariable) + (0)) ((☁ HexVariable) - (0)) ((☁ HexVariable) * (1)) ((☁ HexVariable) / (1))
Scratch retains the case of the hexadecimal digits, so it will remember if a variable was saved as "0xe" or "0xE" on the Cloud. To detect case read this article. Therefore base-22 can be used by using uppercase A-F and lowercase a-f as separate digits, to produce the 22 digits: "0123456789abcdefABCDEF". This will no longer allow for simple conversion back to base-10. To convert from base-22 to base-10, the following custom blocks must be used:
define letter number of (character) in (string) set [counter v] to  set [output v] to  //This will be what happens if it is not found repeat (length of (string)) //For every character if <<(character) = (letter (counter) of (string))> and <case sensing :: grey>> then //If a match is found set [output v] to (counter) stop [this script v] end define to base-10 (hex) set [placevalue v] to  //Represents how much each hex digit is worth set [counter v] to (length of (hex)) //Represents the digit it is decoding set [result v] to  //This will store the final output //It starts from the end and works its way back repeat (length of (hex)) letter number of (letter (counter) of (hex)) in [0123456789abcdefABCDEF] set [result v] to (join (result) ((output) * (placevalue))) change [counter v] by (-1) //Because it is working in reverse set [placevalue v] to ((placevalue) * (16)) end //The base-10 output is stored in the variable "result"
Issues with Cloud
In October of 2016, the cloud infrastructure started to fail occasionally. As a result, many multiplayer focused projects did not work correctly. This has been attributed to the ever increasing number of active users who are using cloud variables, with some projects sending up to 30 requests per cloud variable per second. This effectively "spammed" the cloud server with a load that couldn't be handled by the current infrastructure and shut it down.
As a temporary fix, cloud variables have switched to using a different polling method, which is more reliable but significantly slower. Furthermore, the polling interval time was increased, to prevent spam. This new method works, but may cause cloud variables to "rubber band" and reset to a previous value after it has been changed, as well as making many multiplayer projects less "real-time" or completely breaking them in general.
As of August 2017, a new cloud data system was in beta. It used secure websockets as the communication channel. To use the new system, one could add
?newcloud to the end of the URL address to a project. The system is now the default.
- TheLogFather. (7/10/2016). "Cloud currently down...[title]" https://github.com/LLK/scratch-flash/issues/1211
- TheLogFather. (2/11/2016). "The point I'm trying to make is about changing the cloudvar(s) at every pass through a loop, i.e. something like 10-20x per second. This effectively 'spams' the cloud server." https://github.com/LLK/scratch-flash/issues/1211#issuecomment-257654646
- thisandagain. (27/10/2016). "Hi @TheLogFather, our Cloud Variables infrastructure is simply unable to keep up with the load that we experience generally between noon and 6pm ET." https://github.com/LLK/scratch-flash/issues/1211#issuecomment-256414214
- jwzimmer. (23/8/2017). "The new cloud data work has been deployed as a soft launch (accessible by specific URLs) on Production." https://github.com/LLK/scratch-flash/issues/1211#issuecomment-324073462
- colbygk. (11/9/2017). "Clouddata has now been migrated to the new websockets based platform and
?newcloudis no longer required to have a project use it." https://github.com/LLK/scratch-flash/issues/1211#issuecomment-328386028